Is your car ball jammed and stacked? So, you are searching for authentic guidelines on “how to grease a sealed ball joint?”. You are definitely in the right place! This article will give you a complete procedure to make this tedious task more manageable.
Greasing sealed ball connections is an essential task for the vehicle to get good performance. But many people found it difficult to do. However, if you know the actual process and work accordingly, it is super easy. So, let’s test how to do this. After reading the whole article, you can do it yourself.
Necessary Tools For Ball Joint Grease:
How to grease a sealed ball joint? Check out the answers and methods below.
Before you start work, let’s find out what type of tools you need to perform it. Again, to handle these, you need basic knowledge of such stuff.
1. Grease Gun:
The very first and most essential thing you need is a greasing gun. It is better to use a manually powered grease gun. It will give you extra control over the greasing procedure.
You can feel the grease flow and can control it accordingly. In case of space shortage, you can also use a short grease gun.
Then you need grease that worth the value. Without good quality grease for the ball joints, your work will not be perfect.
2. A Hose:
In most vehicles, it is difficult for one to join the balls even after using a short grease gun. In such a condition, use a hose to do it. It will make the task easy and convenient for you.
3. Grease Cleaner:
The most important part of greasing the sealed joint balls is to ensure the cleanliness of them. A grease cleaner will help you in this case.
It enables you to remove unnecessary parts and debris from the balls. Therefore, any leakage of the grease will also be visible easily.
Those are some of the basic things you need to grease the balls. Now, let’s know how to do it using the following tools.
How To Grease A Sealed Ball Joints: Step by step procedures
To better understand, we have separated the whole procedure into several steps. Follow the steps and do it carefully so that nothing goes undone. Rest assured, you can fix your ball joints in your garage.
Step 1: Check The Fittings
You must check the ball joints first and their fittings. It will be easier if there are zerk fittings installed into the ball joints.
Check the dust boot whether there are any leaks into it. If so, replace or repair it as it can block the inside.
Now, clean the zerk fittings thoroughly so that grease may enter into them. Attach the grease gun that perfectly matches it.
Step 2: Connect Grease Machine
Here, you have to attach the grease machine with the fitting. Press down the coupler of the device until your hand feels that the coupler is adjusted.
Now, loose down the clamp twisting it. However, tighten it before starting the pumping process.
N.B: It is vital to keep an excellent tight and fit connection with the zerk and grease gun. Otherwise, the grease may ooze down.
Step 3: Start Pumping
Once you are ready, now you can go for the pump. Gently pump the grease into it and get a clear view of it. Do not grease once the boot has been filled up.
Exception: Some ball joints offer a valve to release the old grease out of it. In such cases, the pumping method is the best to apply.
Step 4: Detach The Coupler
It is also essential to detach the coupler, letting the fitting as well as zerk unharmed. Tilt the coupler and slowly pull it out of the zerk.
An adjustable coupler is the best in this case. If your gun does not offer an adjustable one, get one. It will make the task much easier solving the problem.
Step 5: Wipe Away And Test-Run
Finally, wipe away extra things from the ball joints and go for a test with the vehicle. If everything is okay, your job is complete. On the contrary, you can check again repeat the process.
N.B: Initially, it may feel a bit jam, but after a few runs, the problem will solve. Again, replace your ball joints with a zerk fitting; it will make the future task easy.
Now, what if nothing came out of the balls. That means there is something solid clogging the balls. Let’s know how to clean a blocked grease ball joints.
How to clean clogged grease ball joints?
This procedure may be a bit tough than before. However, if you follow the below guidelines, we think you can do it quickly.
- Remove the zerk and attach the grease gun with it.
- Push some grease through the zerk.
- If nothing came out, use a propane torch to heat the zerk so that hard grease comes out.
- Make the seal tight, pressuring the coupler, and there you have it.
Bottom Line:
Those are the procedure to grease a sealed ball of your vehicle. As we said earlier, it is not difficult to do if you maintain all the steps correctly. So, if you are a beginner, give yourself some try. Eventually, you can do it properly.
Do you know a better way “how to grease sealed ball joints?”. Let us know your way.
Thanks for being with us!
