Heat pump not blowing air?
When the cold season sets in, your heat pump failing to work is your worst nightmare. As a homeowner, your first instinct is likely to be something broken in the heat pump. Unfortunately, speculating will not give you the answers you need.
When your heat pump seems to be acting up, your next course of action is to get in touch with qualified maintenance personnel. Anderson Air is a firm with a team of experts who can help you with your heat pump issue. For further information, visit https://andersonair.com/residential/heating-repair/.
If you are new to using a heat pump, it may take some getting used to it. Still, it’s easy to notice when something is not right regardless of using it for the first time. When you get to know why your heat pump is acting up, you are in a good position to plan your next moves.
What Kind Of Air Can Your Heat Pump?
The primary function of a heat pump is to ensure that you stay warm in the cold season. The kind of air coming from a heat pump depends on what you set on the thermostat. There are some high-tech heat pumps with sensors that ensure your heat pump runs uninterrupted.
Air heat pumps come engineered to transfer heat without hick-ups, to understand better why you need to fuss when your heat pump fails to pump. The process involves the extraction of heat from outside air into your home.
Compared to other heating alternatives like a furnace, the heat from a heat pump is less warm at approximately 80-95 degrees Fahrenheit. This heat level is lower than the heat from the body, which is why it may feel somewhat cold.
So why is your heat pump not blowing air?
Reasons Your Heat Pump Is Running But Not Blowing Air
It can be frustrating when you find that your heat pump is on but not blowing air when you need it. Let examine some reasons why this happens.
Dirty Condenser
You should schedule frequent maintenance for your heat pump to check on parts like the condenser coil. Dust and debris are fond of clogging the condenser.
These components end up restricting airflow. Your heat pump should start working as required after cleaning by an expert.
Clogged Filter
A Clogged air filter is easy to take care of since all you have to do is replace it or clean it. Heat pumps, in a way, rely on the air that gets through the filter. When the filter fails to perform, it makes the heat pump slow down.
A heat pump comes with a design that automatically ensures that it’s not blowing unfiltered air. Running a heat pump with a clogged filter can have expensive repercussions.
Obstacles Outside
When installing your heat pump outside, an expert will tell you how much clear space to leave for it. If there are any plants in the way of a heat pump, you have to clear them. When plants get in the course of the heat pump, then there are issues with the airflow, which eventually affect the way a pump functions.
Faulty Heat Pump Blower
The heat pump blower works to guide air throughout your space. Ideally, it works along a belt that coordinates the motor and pumps blower. The result of a broken belt is that air will not get transferred as intended. Therefore, it would be best to get a new belt rather than have the broken one repaired.
Sometimes the heat pump blower could be frozen, especially during the cold season. Switching the heat pump on should deactivate the defrost cycle. If you notice this, leave it to thaw off and then try to start it up again. Your maintenance team can deal with this if it fails to work after thawing.
Loose Inners
Like most home heating apparatus, a heat pump will have loose parts once in a while. Some of the elements that could come loose may be directly associated with the ability of your heat pump to blow air. Strange noises from inside the pump blower can tell you if a part has loosened.
Every part of a heat pump, regardless of how minor, is essential to its functionality. Therefore, it is imperative to pay attention to such an issue and have it tightened.
At the same time, it’s essential to know that there will always be a noise coming from your heat pump. It’s up to you to differentiate between what is worth your attention and what is not.
Reduced Refrigerant Levels
A refrigerant plays a significant role in your heat pump. It makes loops around the evaporator coil to cool the air inside more than outside. The outside air gets pulled to the condenser coil, or the refrigerant extracts the heat and takes it to the evaporator coil.
If the refrigerant leaks, there is no warm air left behind for the heat pump to pump. Some heat pump models may allow your technician to add back the leaked refrigerant. It’s important to remember that you might be looking at a potential entire unit replacement when there is a refrigerant leak.
Old Unit
When manufacturers assemble heat pumps, they use parts that will last up to a particular time. Therefore, a heat pump failing to pump air even when turned on could be a sign of strain.
Unless you have a new unit that is not blowing air, you must consider the age factor. You might have to start thinking about replacing your old unit with a more unique, more efficient model.
Final Word
You don’t have to wait until your heat pump fan is not blowing air on a cold night. Scheduling maintenance as often as you can eliminate the possibility of you having to sleep in the cold. At times you don’t even have to call in a technician. Instead, you can move a few things to get your heat pump to function as intended.
