Bedford is a small town located in Hillsborough County. It is one of the best places to live in New Hampshire, United States. As per 2019 estimates, the average population of Bedford is around 22,628. Around 85.17% of the houses in Bedford are owner-occupied.
For enjoying a peaceful and healthy lifestyle, besides taking care of the interiors, furniture, and yard, it is also essential to check the other crucial aspects of the house like electrical wiring, water connection, drainage system, etc. For example, the drainage system of the house is fundamental for the health and hygiene of all those who are residing in that house. If your drainage system is not working correctly, it can lead to flooding of the bathroom, toilets, kitchen sinks, which leads to severe unhygienic living conditions for people and pets.
Drainage issues are complex, and you need to hire an emergency plumber Bedford for troubleshooting. Plumbers in Bedford have decades of experience in troubleshooting drain issues. They can fix the problematic drain without causing any damage to the drainage system and not increase the repairing costs.
Here are some techniques plumbers often use to troubleshoot drain-related issues in any household:
Improper installation and leaks can be identified by close inspection of the drainage system from the outside. However, to troubleshoot drain blockage issues, you need to inspect deeper. The plumbers use pipe cameras to get the internal view and the exact location of the blockage. A video camera is connected to a cable. The emergency plumber in Bedford will maneuver the cable through the drain pipes to reach the blockage, which is otherwise hard to get. The pipe camera gives them an inside view of the drain pipes, and the visuals help them decide which tool to use to clear the drain blockage.
Hydro-jet is a common technique used by plumbers to clear drain blockages. The hydro-jet can break the toughest drain clog and is also safe for the house’s residents. The hydro-jet tools send pressurized water to break the drain build-up through the drain pipe. It is faster than a drain snake and more effective in clearing the drain clogs. The water’s force also helps remove the sticky residue on the inner side of the drain pipes and cleans your drain effectively. Hence, the hydro-jet clears the current drain clog and reduces the chances of early drain clog soon.
Motorized Drain Snake
The motorized drain snake works the same as a manual drain snake. The motorized version is used for longer drain pipes where plumbers cannot use manual drain snakes due to their limited reach. Experts say that the motorized drain snake can clean stubborn clogs.
Motorized drain snakes can be wired or cordless. These drain cleaning devices have automatic feeds that facilitate their movement inside the drain pipes. The plumber can insert the motorized drain snake inside the drainage system with a button push and retract it quickly after the drain clog is removed.
Manual Drain Snake
The manual drain snake has a long cable, and one end of this device resembles a corkscrew. The handle is attached to the cable. The plumber places the end of the cable in the drain’s opening and then cranks the cable through the drain. When the plumber reaches the clog, they will maneuver the cable until the clog is broken down and the water flows freely towards the main drain.
Power rodding systems are alternative to motorized drain snakes. The system has a flexible metal cable inside the drainage systems and around joints and bends. The cleaning head of the power rodding system has sharp teeth installed at the end of the cable. The attachment size is selected as per the diameter of the drain pipe. The electric motor rotates the cable, which causes the short head to rotate at high speed. The rotating actions break the obstruction blocking the flow of water. The sharp teeth of the cleaning attachment can shave off years of sludge built-up inside the drain pipe and also shear any protrusions like tree roots. The high-speed cutting tool of the power rodding system is powerful enough to shred the hardened obstructive material into tiny fragments which can be easily flushed away with water.
Thus, professional plumbers use these techniques to troubleshoot various drain issues. Their selection method depends on the application, type of drain pipes, the drain clog, and the drain pipe’s length. No matter what technique they select, professionals ensure the drain clog is obliterated, and the water smoothly flows through the drainage system.