Easy Ways To Keep Your Carpet Clean
Carpet cleaning is serious work. This is why most people simply opt to hire carpet cleaners in Melbourne to do the job. However, you may be able to clean your carpet if you have the right tools and you know the steps to follow. Here are 10 simple steps to clean your own carpets.
1. Move your furniture
If you don’t move your furniture out of the way, there are high chances that you may miss a few spots. For full coverage of your carpet, you should move your furniture. Most times, heavy pieces of furniture leave ugly indentations on your carpet. You can easily get rid of these indents by rubbing ice cubes over them.
2. Remove smaller items
Asides from moving furniture, you should get rid of other small items on your carpets. This includes items like toys, baskets, flowerpots, and so on. It makes the cleaning process a lot easier and safer. You don’t want to trip over toys and other smaller items while cleaning.
3. Vacuum the room
This is the basic step for cleaning your carpet. Vacuuming your room helps to get rid of debris, dust, and other loose dirt on the carpet surface. Do this twice a week. However, you can make this more frequent in areas with high traffic.
4. Pre-treatment
You can carry out pre-treatment with a spray bottle, warm water, and detergent. Do this after you have removed loose dirt particles on your carpet with the vacuum. Pretreatment is usually done to get rid of the less stubborn stains like coffee spills or mud stains. But be wary of liquid stains. You could make them worse when you rub them into your carpet. Here what you just need to do is
- Spray the carpet cleaner liquid lightly over the affected area
- Leave for a few minutes until the stain dissolves
- Wipe it with a clean dry cloth
5. Use carpet shampoo
You can deep clean your carpet with a carpet shampoo if there are stubborn dirt stains on it. Follow the manufacturer’s guidelines to use the shampoo but be careful not to soak your carpet with too much moisture. Too much moisture will take longer to dry and this can cause mildew problems.
6. Read instructions
Whether it is a vacuum or carpet cleaner, read the instruction manual of your cleaning equipment before use. There are multiple cleaning settings to choose from which depend on the floor type. You have to be sure that you have selected the appropriate carpet cleaning option. In doing this, you use your machine at its optimum setting and prevent unnecessary equipment damage.
7. Clean with a Carpet cleaner
Deep cleaning your carpet at least once in 18 months is recommended to make it last longer. Use a carpet cleaner for the best results. Start cleaning from a corner of your room and move to the other end in a straight line. Continue this until you have a full completely covered every inch of your carpet.
8. Store cleaning equipment properly
After each cleaning, you should pack our cleaning equipment and store them properly. You should always clean the brushes of your vacuum cleaner after every use and empty the vacuum canister after cleaning a couple of times. Keep the filters clean too. Empty and rinse any water left in the steam cleaner tank before storage. Good maintenance practices like this keep your cleaning equipment in good condition and make subsequent cleaning effective.
9. Dry your carpet
Take care not to let your carpet get too wet during the cleaning process. It gets dry faster that way. Also, when carpets get too wet, dyes from the underlay would leach through and discolor them. After cleaning, open your windows and turn on the fans to dry your carpet. Leave your carpet to dry completely and properly before moving your furniture back in.
10. Frequent Cleaning
Cleaning your carpet should be a frequent exercise to continue to enjoy its warm coziness. This way you can be sure that your carpet is well maintained and remains in a good condition always. You could also employ professional carpet cleaning services once in a while to extend your carpet’s lifespan.
