Whether you are moving oils, chemicals, acids, or other hazardous liquids in bulk, the best pigging equipment will ensure that your product flows smoothly.
Pigging is a method used by oil refineries for inspection or maintenance purposes. It involves drawing out products using pipelines with pigs inside them to push the fluid through. Because there are so many different types of material being moved around, it is important to consider when selecting which equipment you need to buy. Here are ten things to think about when buying the best pigging equipments in Singapore:
1) What type of fluids are involved? The materials being transported will affect what sort of pipeline and pig system you should use. For example, thicker substances may be harder to transport because they clog lines more easily, while other liquids like water can rust equipment if they are left for too long.
2) The size of the fluid line Different pipes need different sized pigs. For example, an inch and a half pipe will use pigs up to 1 inch, whereas 4 inch pipes can have pigs up to 6 inches in diameter.
3) The fluid’s viscosity If the material is non-Newtonian or has particles in it, then you might want to opt for a certain type of pigging equipment. Some fluids become thicker when moving at high speeds, so using standard pigging equipment may not be suitable. This affects how well your product flows through your pipeline, so you will consider this when selecting equipment.
4) The pipeline’s length The longer the pipeline, the more difficult it is to push products through, so make sure you choose equipment that can compensate for this. As pipelines get longer, rotating pigging tools will be needed, whereas, in shorter lines, they may not be required at all. If your product needs to go uphill or downhill, it will need even more power to push it along.
5) Product density Products with different densities require different types of pigs to move them around safely and efficiently. Wet, dry, and multi-phase products should use their equipment based on what is optimal for each product type.
6) Material hardness What materials are used in the fluid pipeline? A softer material like rubber will need a different type of pig to a harder one like metal. If the equipment being used doesn’t have the right level of hardness, then it could wear down quickly or even damage your product.
7) Temperature extremes: Different types of pigs are designed for working in high temperatures, so they can ensure that you keep pushing product through at a steady rate. Oil and gas industries usually use these more expensive materials because they work better over time under extreme conditions.
8) The chemicals involved: Some chemical pigging equipment is safer to use with certain liquids than others based on how corrosive they are. Before buying expensive fluid handling equipment, it’s important to check as not all substances require the same safety features.
9) Monitoring equipment Some pigging equipment will help you keep track of what is happening with your product in real-time. Many types of fluid monitoring systems can measure things like flow rates, pressure levels, and the actual material being moved.
10) Maintenance costs How much do repairs cost? The more expensive a system is then, the longer it will last. If you want to spend less money over time, buy cheaper products that will break down quicker but need replacing more often.
There are many different types of pigging equipment that can be used in a variety of applications. Your choice should depend on the type and size of the pipeline you need to clean, as well as what kind of material it’s made from. If you’re unsure which is best for your needs, contact one or more companies who specialize in this field, and they will help guide you through the process.
