When you’re a busy parent, fixing plumbing problems on your own isn’t always possible. The good news is that there are ways to tackle a plumbing problem without calling in help. Follow these steps and your lawn game will soon be back to normal.
The first step to getting rid of clogged drains is identifying the problem. Is it a toilet that’s overflowing? A sink that doesn’t drain evenly? Or perhaps an outside pipe that’s backing up sewage into your property? You can usually identify the source of a clog by finding the source. If this is not possible, then you should call for assistance from a plumbing company and have someone come out to unblock your drains.
With so many different types of plumbing problems out there, it can be hard to know where to begin looking for help. Fortunately, we’ve put together this article trying to explain how to fix common plumbing problems on your own without needing an expensive plumbing repairman or plumber coming out to replace pipes.
Look for clogs with a plunger
Many clogs are made up of multiple pieces of different types of pipes clogging up with one another. Before you tackle a plumbing problem on your own, it’s smart to first call a plumbing repair Guelph Company, and have them come out to repair clogs in your pipes.
Some clogs are easy to spot because they will have small plastic plugs in them. When these clogs are located, you can usually unclog a clog by removing the plastic plugs and throwing them away. If the clog is still apparent after this, you should consult a plumber.
Turn off the water to the main sewer line
As mentioned above, clogs can form in the pipes that carry water from your house to the outdoors. To prevent clogging, turn off the water to the main sewage line when you’re not using it and carry out maintenance such as cleaning out the inside of your house or installing a trash can under your kitchen sink. You can also purchase an expandable cutting board or cross-cut saw to help you unclog pipes. Make sure to clean out the saw before you use it to avoid cutting yourself.
Know where plumbing pipes come from and how they’re connected
Plumbing pipes come from a network of pipes called the main sewer line. The sewer line runs through your house and empties into a large, disposal-type plastic pipe called a sewage system. At the opposite end of the line from the sewage system is a “back-up” sewer line. The “back-up” line is usually contained within a larger pipe called a water heater, sometimes with a sewer connection near the end of it.
The water heater may be the source of your plumbing problems as well. Leaky water heaters can easily back up into your house, causing flooding. If you’re experiencing flooding, you should contact your home’s plumber immediately to fix the problem.
Test for blockages
If your main sewage line is clogged, you can also try using a plunger to unclog it. A plunger is a small device that you stick down the pipe to remove clogs. When you’ve successfully removed the clog, remove the plunger and check to make sure that it’s clear. A clog is often caused by debris or tree roots getting stuck in theory. When this happens, your water will appear murky while your pipes are still backed up with water. If this is the case, you should call a plumbing company to unclog your drains.
Use a shovel to unclog a drain
If your plumber can’t clear your clogs, or if this article has helped but you still have a clog, you should try out this next method first. If this works and you are still having issues unclogging your drains, then you should call a plumbing repairman to come out and fix the problem. This next tip may help unclog a haunted house. Place a brick or two in the drains that lead to your house. If this works, then the clog is in the drain and not the pipes.
As the holidays are coming up, clogs are a frequent problem for many parents. Fortunately, there are ways to tackle clogging without needing a plumbing repairman or plumber coming out to mend pipes. Follow these steps and your lawn game will soon be back to normal.